We offer products or product combinations for these applications

We offer products or product combinations for these applications:

  • easy to clean surfaces
  • oleophoby and/ or hydrophoby coatings
  • oleophoby, hydrophoby and antistatic
  • oleophoby, hydrophoby and flame retardent
  • oleophoby, hydrophoby in combination with antibacterial or fungicide products
  • oleophoby, hydrophoby with nano-sized additives to obtain a better abrasion resistance

 

Products

Sogetec  041/10 PM

Sogetec  047

Sogetec  074

Sogetec  076

 

Sogetec  041/10 PM

Product description

Sogetec 041/10 is a water based impregnating agent with kationic character for the permanent hydrophobation (water repellent) and oleophobation (oil repellent) of textiles. Sogetec 041/10 is made by means of the sol-gel-technique. The nano particles create a transparent, very thin but gapless coating around each fibre of the fabric to which they are applied. Due to the small size of the particles a total penetration even through tight textile structures is possible. A high heat and hydrolysis resistance is achieved due to the water and oil repellence. This reduces unwanted water absorption and soiling of textile conveyor belts enormously.

Application

Textiles and similar surfaces used as papermachine clothing for the paper production

Data

Active component:

Fluorinated Siloxane resin; approx. 10% solid matter  

Appearance:

White, translucent Fluid

Solubility:

Can be diluted with any proportion of water

Storage:

Sensitive to frost – do not store under 2°C;
durability: 6 months (according to prior experience)

Direction for use

Shake before use. We advise you to apply Sogetec 047 with commonly used textile coating systems or immersion methods. When spraying the impregnating liquor to the fabrics there should be sufficient ventilation. The aerosols mustn’t be inhaled. High-speed stirring can destroy the dispersion and should be avoided. The pH- factor of the ready liquor should be slightly acidic (pH 5,5 - 6,5). Directly after the impregnation the active components begin to form polymers on every single fibre and turn into an even wet coating on the substrate surface. During the subsequent thermal drying process (at least 130°C for 3 minutes) the applied chemicals form a network and turn into the already described permanent coating. Its stability can be increased if a chemical bondage between the coating and the fibre-building polymers is possible.

Before applying Sogetec 041/10 to items, these should be thoroughly washed in order to remove any additives or textile-finishing agents (for example wetting and slip agents) for these substances can influence the adhesion and the regularity of the nano particle coating.

If you would like to mix Sogetec 041/10 with other agents or change its composition we kindly ask of you to contact us. Incompatibility of these agents with Sogetec 041/10 could lead to a reduction of its effectiveness.

Properties after application

Appearance

Thin, transparent coating (no sealing)

Water absorption

Low, water trickles down sloping surfaces (Mark for water 8-10)

Öil absorption

Low, trickles down sloping surfaces (Mark for öl 6-8)

Reaction towards sticky or/and oily substances

Substances can easily be removed mechanically, e.g. by high pressure water

Stability towards yellowing

good

Example of use (for man-made materials)

The washed product is padded with a liquor concentration of 50-100 ml/l Sogetec 041/10, then dried (120-130°C) and finally condensed (if possible 160°C or higher temperature) within 30-40 seconds

 

Sogetec  047

Product description

Sogetec 047 is a water based impregnating agent with anionic character for the permanent hydrophobation (water repellent) and oleophobation (oil repellent) of textiles. Sogetec 047 is fabricated by means of the sol-gel-technique. The nano particles create a transparent, very thin but gapless coating around each fibre of the fabric to which they are applied. Due to the smallness of the particles a total penetration even through tight textile structures is possible. The washing permanent hydrophobation and oleophobation effectively reduces the absorption of water and distinctly facilitates the cleaning of textiles stained by substances containing acids or sugar, such as coffee, ketchup, lemonade and coke and also of textiles smeared with oily and fatty products such as mayonnaise and olive oil.

Application

Textiles and similar surfaces ranging from clothing (men’s, ladies’ and children’s wear, work clothes), home textiles (upholstery, curtains, tablecloths) to technical textiles (automobile interior decoration).

Data

Active component:

Fluorinated siloxane resin; approx. 10% solid matter 

Appearance:

White, translucent fluid

Solubility:

Can be diluted with any proportion of water

Storage:

 sensitive to frost – do not store under 2°C;
durability: 6 months (according to prior experience)

Directions for use (same procedure like a FC treatment)

Shake before use. We advise you to apply Sogetec 047 with commonly used textile coating systems or immersion methods. When spraying the impregnating liquor to the fabrics there should be sufficient ventilation. The aerosols mustn’t be inhaled. High-speed stirring can destroy the dispersion and should be avoided. The pH- factor of the ready liquor should be slightly acidic (pH 5,5-6,5). Directly after the impregnation the active components begin to form polymers on every single fibre and turn into an even wet coating on the substrate surface. During the subsequent thermal drying process (at least 130°C for 3 minutes) the applied chemicals form a network and turn into the already described permanent coating. Its stability can be increased if a chemical bondage between the coating and the fibre-building polymers is possible.

Before applying Sogetec 047 to items, these should be thoroughly washed in order to remove any additives or textile-finishing agents (for example wetting and slip agents) for these substances can influence the adhesion and the regularity of the nano particle coating.

If you would like to mix Sogetec 047 with other agents or change its composition we kindly ask of you to contact us. Incompatibility of these agents with Sogetec 047 could lead to a reduction of its effectiveness.

Properties after the application

Appearance

thin, transparent coating ( no sealing), colours of the fabrics can appear darker depending on the amount of Sogetec 047 used

Water absorption

low, water trickles down sloping surfaces (mark for water 8-10)

Oil absorption

low, trickles down sloping surfaces (mark for oil 6-8)

Reaktion towards coffee, milk, cocoa, ketchup or lemonades

substances trickles down sloping surfaces and can be easily removed by shaking or spraying with clear water, they can also be removed mechanically after drying

Surface feel (haptics)

no interference if liquor concentration is 50 – 100 ml/litre

Flammability

depending on the substrate the flammability can be influenced negatively, in this case our product „Sogetec 047 FR“ should be utilised

Stability towards yellowing

Good

Example for use (for PES, PA)

The washed product is padded with a liquor concentration of 20 – 50 ml/l Sogetec 047 (30%) then dried (120-130°C) and
finally condensed (if possible 160° or higher temperatures) within 30-40 seconds

 

Sogetec  074

Product description

Sogetec 074 is a water based impregnating agent with anionic character for the permanent hydrophobation (water repellent) and oleophobation (oil repellent) of textiles. Sogetec 074 is fabricated by means of the sol-gel-technique. The combination of inorganic nanoparticles, nano-scaled silanes and fluorinated polyacrylates create a transparent, very thin but gapless coating around each fibre of the fabric to which they are applied. Due to the smallness of the particles a total penetration even through tight textile structures is possible. The washing permanent hydrophobation and oleophobation effectively reduces the absorption of water and distinctly facilitates the cleaning of textiles stained by substances containing acids or sugar, such as coffee, ketchup, lemonade and coke and also of textiles smeared with oily and fatty products such as mayonnaise and olive oil.

Application

Textiles and similar surfaces ranging from clothing (men’s, ladies’ and children’s wear, work clothes), home textiles (upholstery, curtains, tablecloths) to technical textiles (automobile interior decoration).

Data

Active component:

Fluorinated siloxane and polyacrylate resin; inorganic Nanoparticles approx. 36% solid matter 

Appearance:

White, translucent fluid
Solubility: Can be diluted with any proportion of water

Storage:

sensitive to frost – do not store under 2°C;
durability: 3 months (according to prior experience)

Directions for use (same procedure like a FC treatment)

Shake before use. We advise you to apply Sogetec 074 with commonly used textile coating systems or immersion methods. When spraying the impregnating liquor to the fabrics there should be sufficient ventilation. The aerosols mustn’t be inhaled. High-speed stirring can destroy the dispersion and should be avoided. The pH- factor of the ready liquor should be slightly acidic (pH 5,5-6,5). Directly after the impregnation the active components begin to form polymers on every single fibre and turn into an even wet coating on the substrate surface. During the subsequent thermal drying process (at least 130°C for 3 minutes) the applied chemicals form a network and turn into the already described permanent coating. Its stability can be increased if a chemical bondage between the coating and the fibre-building polymers is possible.
Before applying Sogetec 074 to items, these should be thoroughly washed in order to remove any additives or textile-finishing agents (for example wetting and slip agents) for these substances can influence the adhesion and the regularity of the nano particle coating.
If you would like to mix Sogetec 074 with other agents or change its composition we kindly ask of you to contact us. Incompatibility of these agents with Sogetec 074 could lead to a reduction of its effectiveness.

Properties after the application

Appearance

thin, transparent coating ( no sealing), colours of the fabrics can appear darker depending on the amount of Sogetec 066 used

Water absorption

low, water trickles down sloping surfaces (mark for water 8-10)

Oil absorption

low, trickles down sloping surfaces (mark for oil 6-8)

Reaktion towards coffee, milk, cocoa, ketchup or lemonades

substances trickles down sloping surfaces and can be easily removed by shaking or spraying with clear water, they can also be removed mechanically after drying

Surface feel (haptics)

no interference if liquor concentration is 10 – 50 ml/litre

Flammability

depending on the substrate the flammability can be influenced negatively, in this case a suitable flame retarder should be utilised

Stability towards yellowing

Good

Example for use (for PES, PA)

The washed product is padded with a liquor concentration of 10 – 50 ml/l Sogetec 074, then dried (120-130°C) and
finally condensed (if possible 160° or higher temperatures) within 30-40 seconds.

 

Sogetec  076

Product description

Sogetec 076 is a wash resistant, water based impregnating agent with kationic character for the permanent hydrophobation (water repellent) and oleophobation (oil repellent) of textiles. Sogetec 076 is fabricated by means of the sol-gel-technique. The nano-scaled chemicals create a transparent, very thin but gapless coating around each fibre of the fabric to which they are applied. Due to the smallness of the particles a total penetration even through tight textile structures is possible. The washing permanent hydrophobation and oleophobation effectively reduces the absorption of water and distinctly facilitates the cleaning of textiles stained by substances containing acids or sugar, such as coffee, ketchup, lemonade and coke and also of textiles smeared with oily and fatty products such as mayonnaise and olive oil.

Application

Textiles and similar surfaces (professional and working wear), which will be washed often.

Data

Active component:

Fluorinated polyacrylate resin; water based silanes

Appearance:

White, translucent fluid
Solubility: Can be diluted with any proportion of water
Storage: sensitive to frost – do not store under 2°C;
durability: 6 months (according to prior experience)

Directions for use (same procedure like a FC treatment)

Shake before use. We advise you to apply Sogetec 076 with commonly used textile coating systems or immersion methods. When spraying the impregnating liquor to the fabrics there should be sufficient ventilation. The aerosols mustn’t be inhaled. High-speed stirring can destroy the dispersion and should be avoided. The pH- factor of the ready liquor should be slightly acidic (pH 5,5-6,5). Directly after the impregnation the active components begin to form polymers on every single fibre and turn into an even wet coating on the substrate surface. During the subsequent thermal drying process (at least 130°C for 3 minutes) the applied chemicals form a network and turn into the already described permanent coating. Its stability can be increased if a chemical bondage between the coating and the fibre-building polymers is possible.
Before applying Sogetec 076 to items, these should be thoroughly washed in order to remove any additives or textile-finishing agents (for example wetting and slip agents) for these substances can influence the adhesion and the regularity of the nano particle coating.
If you would like to mix Sogetec 076 with other agents or change its composition we kindly ask of you to contact us. Incompatibility of these agents with Sogetec 076 could lead to a reduction of its effectiveness.

Properties after the application

Appearance

thin, transparent coating (no sealing), colours of the fabrics can appear darker depending on the amount of Sogetec 047 used

Water absorption

low, water trickles down sloping surfaces (mark for water 8-10)

Oil absorption

low, trickles down sloping surfaces (mark for oil 6-8)

Reaktion towards coffee, milk, cocoa, ketchup or lemonades

substances trickles down sloping surfaces and can be easily removed by shaking or spraying with clear water, they can also be removed mechanically after drying

Surface feel (haptics)

no interference if liquor concentration is 10 – 50 ml/litre

Flammability

depending on the substrate the flammability can be influenced negatively, in this case a suitable flame retarder should be utilised

Stability towards yellowing

Good

Example for use (for PES, PA)

The washed product is padded with a liquor concentration of 10 – 50 ml/l Sogetec 076, then dried (120-130°C) and
finally condensed (if possible 160° or higher temperatures) within 30-40 seconds.